Professional Photography Lighting Since 1993 X-System 2.4GHz · Worldwide Dealer Network

Which Lighting Problem Are You Actually Solving? A 4-Scenario Breakdown (From Someone Who's Gotten It Wrong)

The Problem With "Best" in Lighting

I've been coordinating commercial lighting orders for 8 years. In that time, I've personally made—and wrote down—14 significant purchasing mistakes. Roughly $6,800 in wasted budget, plus at least two client relationships that took a hit.

Here's the pattern I've noticed: most of those mistakes happened because I applied the wrong solution to the right problem. Or the right solution to a problem I'd misdiagnosed.

Lighting isn't one decision. It's at least four, and they call for completely different answers:

  • You're retrofitting an existing space—old recessed cans, failing modules, drop-in replacement needed.
  • You need jobsite or temporary lighting—high-output, portable, mean to be abused.
  • You're specifying decorative fixtures—chandeliers, pendants, statement pieces.
  • Something's making noise—buzzing, humming, flickering, and you're not sure whose fault it is.

If you're shopping for "the best chandelier" or "an LED work light" without knowing which scenario you're in, you're probably going to buy the wrong thing. I know, because I've done it in each of these categories—sometimes more than once.

Scenario A: You're Replacing Old Recessed Cans

This is the retrofit scenario. You've got 5" or 6" recessed housings in a ceiling, the old incandescent or CFL modules are failing, and you want to drop in LED retrofits without ripping out the housing.

The Feit Electric LED retrofit kit CELEDRT56/927/2 is a common choice here—5/6 inch, 2700K, 2-pack. I've ordered hundreds of these units across property management projects. Solid product for standard cans. But I've also gotten complacent with it, and that's where the trouble starts.

Where I got burned: In September 2022, I committed to a 400-unit retrofit order for a multifamily property based on the spec sheet and a single sample. We didn't test-fit that sample in the actual housings on-site first. Turned out, about 30% of the housings had been installed in the 1990s and had slightly different trim ring dimensions. The retrofit kit snapped in fine on most—but on those older cans, the retention clips didn't seat properly. We ended up swapping those units for a different trim style. Six weeks of back-and-forth, about $1,100 in extra labor, and a very patient property manager.

The lesson: test-fit before you commit. A 2-pack test in 3–4 actual housings on-site is worth more than any spec sheet, any sample photo, and any vendor assurance.

Small orders matter here, too. I've seen contractors walk away from a vendor because they only wanted to order a single 2-pack to test—and got treated like they were wasting the rep's time. That's backwards. A customer who tests with a $20 order and comes back for a $14,000 project is exactly who you want to keep. And frankly, the small buyers ask better questions up front—the ones that prevent the $1,100 mistakes.

Scenario B: You Need Jobsite or Work Lighting

Different problem entirely. You're lighting a construction site, a garage, a temporary workspace. Feit Electric LED work lights fit this category—portable, high-output, often with tripods or hanging hooks. Not the same product category as the retrofit kit above, and not evaluated the same way.

The rookie mistake I made: In my first year (2017), I ordered work lights based on the lowest price per unit and didn't check actual lumen output. The lights looked bright in the warehouse. On an actual jobsite with 12-foot ceilings and zero ambient light, they were insufficient. We had to supplement with rented lights for the whole project—$890 in rental fees I hadn't budgeted.

What I should have done: calculated required lumens per square foot for the actual workspace height. There's a real difference between 4,000-lumen work lights and 10,000-lumen work lights, and the price gap doesn't reliably reflect that difference. Sometimes the mid-priced unit outperforms both.

One side note worth flagging: brightness claims on packaging should be verifiable. Per FTC advertising guidelines (ftc.gov), lumen and wattage claims need to be substantiated. If a product claims 8,000 lumens and the output isn't there, that's not a small thing—it matters whether you're installing it yourself or reselling it downstream.

Scenario C: You're Specifying Decorative Fixtures (Chandeliers)

Now we're in a completely different world. Decorative fixtures aren't about lumens per square foot. They're about proportion, style, and how the fixture relates to the room it's in.

Two common sub-decisions:

Linear chandelier vs. traditional chandelier

Linear chandeliers work well over kitchen islands, dining tables, and long counters. They distribute light across a horizontal plane. Open-plan kitchen, 7-foot island, linear fixture—almost always the right call.

Traditional round chandeliers are better for foyers, stairwells, and rooms with a central focal point. The classic mistake is putting a round fixture over a long dining table—it looks undersized from the ends, and no amount of dimming fixes that.

On the question of "best chandelier"—there's no universal answer. It's a fit problem: ceiling height, table dimensions, room proportions. A $2,400 fixture can look wrong in a room where a $300 fixture looks right. Or, honestly, the other way around.

My documented mistake: In Q1 2023, I ordered four linear chandeliers for a restaurant build-out based on the architect's drawing. The drawings showed a 10-foot ceiling clearance above the bar. Actual installed ceiling height was 9'2". The fixtures hung 4 inches lower than planned—right at head-height for taller customers. We had to re-order shorter suspension chains: $340 in replacements, two-day install delay, and a very politely annoyed GM.

The lesson: verify ceiling height on-site. Not from drawings. On-site, with a tape measure. Every time.

Scenario D: Something's Buzzing (And You Don't Know Why)

This scenario is diagnostic—and it's where I've wasted the most money chasing the wrong culprit.

"Why does my light switch buzz?" has at least four different answers:

  1. The switch itself is failing. A dimmer going bad or a worn mechanical switch can produce a hum as the internal components degrade.
  2. Incompatible dimmer + LED. Some LEDs and dimmers just don't get along—the dimmer's minimum load or waveform doesn't match the LED driver.
  3. Loose wiring at the switch or fixture. That buzz could be arcing. This is a safety issue—stop using the circuit and get it checked.
  4. The bulb is the culprit. Cheap LEDs or failing drivers can produce an audible buzz at the base.

Where I went wrong: Late 2021, I spent $180 replacing three dimmer switches at a client's office before realizing the buzz was coming from the LED lamps themselves—a bad batch we'd installed six months earlier. The dimmers were fine. I'd misdiagnosed the whole thing because I assumed "switch buzz" meant "switch problem."

The right diagnostic order: bulb first (swap one, listen), then dimmer (check the LED's spec sheet for dimmer compatibility), then wiring (that one needs an electrician—don't guess).

Also—and this is not small—if the buzz gets louder when you dim, and the fixture is on an older dimmer, check the dimmer's minimum load rating. A single 9W LED on a 600W-rated dimmer is often below the minimum draw for the dimmer to operate cleanly. That's a mismatch, not a failure. Replacing the switch won't fix it.

How to Tell Which Scenario You're Actually In

Quick self-check before you buy anything:

  • Is the housing already installed? → Retrofit scenario. Measure the housings, test-fit first.
  • Are you lighting a work area? → Work light scenario. Match lumens to ceiling height and task type—not just price per unit.
  • Is the fixture visible and central to the design? → Decorative scenario. Measure the room on-site. Proportion beats brand recognition.
  • Is there a noise or flicker? → Diagnostic scenario. Start with the bulb, then the dimmer, then wiring.

If you're in more than one scenario—which happens on most projects—handle them separately. The retrofit order and the decorative fixture order shouldn't be evaluated by the same criteria. Speed, budget, appearance: pick two, and pick which two based on the scenario, not the project as a whole.

And if you're a small buyer reading this: none of the mistakes above were "beginner" mistakes. They're mistakes anyone makes when they treat a lighting decision as one problem instead of a set of different ones. Small orders deserve the same clear answers as large ones—and honestly, the buyers with the smallest budget are usually the ones who ask the diagnostic questions that prevent the expensive errors. That's worth remembering the next time a vendor talks to you like your $150 order doesn't matter.